It is mainly used for subsequent surface treatment of artificial graphite and natural graphite after ACM type.Mechanical grinding and shaping machine (air classifier mill). Under the action of long-term low-speed mechanical force, the shape of the particle surface is further repaired, the smoothness of the particle surface is greatly increased, and the powder particle size changes very little, and the finished product yield is high.
Adopting a long-term shaping process, it can fully optimize material particle morphology and significantly enhance material tap density. It effectively improves powder fluidity and fillability, adapting to application scenarios with high requirements for material density.
Performing shaping at low speed for a long time reduces excessive material crushing and loss, greatly improving the shaping yield while balancing finished product quality and production efficiency.
The JCSM-Z series shaping machine achieves ideal minimum particle size (Dmin) control, fully removing fine powder impurities from finished products. It ensures uniform particle size distribution, meeting high-precision processing requirements.
With an optimized structural design, the JCUM-BC series shaping machine has a larger batch processing capacity and significant shaping efficiency advantages. It can efficiently undertake high-capacity production tasks and shorten the production cycle.
| Parameters / Model | JCSM-280Z | JCSM-410Z | JCSM-510Z | JCSM-710Z | JCUM-250BC | JCUM-500BC | JCUM-800BC | JCUM-1000BC |
|---|---|---|---|---|---|---|---|---|
| Max installed power (kW) | 7.5 | 30 | 37 | 55 | 5.5 | 15 | 30 | 45 |
| Max operating speed (rpm) | 7500 | 4800 | 4200 | 3000 | 6000 | 3500 | 2200 | 1750 |
| Classification power (kW) | 3 | 7.5 | 7.5 | 15 | 2.2 | 4 | 5.5 | 7.5 |
| Classifying wheel Max speed (rpm) | 8500 | 6000 | 6000 | 4800 | 4500 | 6000 | 5400 | 4800 |
| Max feeding capacity (L) | 6 | 15 | 25 | 50 | 6 | 25 | 60 | 100 |
Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials.
The above parameters are for reference only, please consult our engineers for details.
